Rangkaian STK 4192 Power Amplifier 50 Watt Stereo

marommuhammad

Wednesday, December 16, 2009

Bagikan :

Tweet

STK 4192 Power Amplifier Circuit Features

• The STK4102II series (STK4192II) and STK4101V series (high-grade type) are pin-compatible in the output
• range of 6W to 50W and enable easy design. Small-sized package whose pin assignment is the same
• as that of the STK4101II series
• Built-in muting circuit to cut off various kinds of pop noise
• Greatly reduced heat sink due to substrate temperature 125°C guaranteed
• Excellent cost performance

Layout STK 4192 Power Amplifier

Skema Rangkaian STK 4192 Power Amplifier 50 Watt Stereo

Component List

R1___________ 56KΩ 1/4W Resistor
R2___________ 56KΩ 1/4W Resistor
R3___________ 1KΩ 1/4W Resistor
R4___________ 1KΩ 1/4W Resistor
R5___________ 560Ω 1/4W Resistor
R6___________ 560Ω 1/4W Resistor
R7___________ 100Ω 1/4W Resistor
R8___________ 100Ω 1/4W Resistor
R9___________ 56KΩ 1/4W Resistor
R10__________56KΩ 1/4W Resistor
R11__________3.3KΩ 1/4W Resistor
R12__________3.3KΩ 1/4W Resistor
R13__________3.3KΩ 1/2W Resistor
R14__________3.3KΩ 1/2W Resistor
R15__________4.7Ω 1/4W Resistor
R16__________4.7Ω 1/4W Resistor
R17__________1KΩ 1/2W Resistor
R18__________1KΩ 1/4W Resistor

C1___________ 400pF Polyester Capacitor
C2___________ 400pF Polyester Capacitor
C3___________ 2.2µF Polyester Capacitor
C4___________ 2.2µF 50V Electrolytic Capacitor
C5___________ 100µF 50V Electrolytic Capacitor
C6___________ 100µF 50V Electrolytic Capacitor
C7___________ 0.1µF 50V Electrolytic Capacitor
C8___________ 0.1µF 50V Electrolytic Capacitor
C9___________ 10µF 50V Electrolytic Capacitor
C10___________ 10µF 50V Electrolytic Capacitor
C11___________ 47µF 50V Electrolytic Capacitor
C12___________ 47µF 50V Electrolytic Capacitor
C13___________ 100µF 50V Electrolytic Capacitor
C14___________ 10µF 50V Electrolytic Capacitor
IC___________ STK4192II Integrated STK Power Amplifier series

power sapply recommend for the STK 4192

Tips that bass sound more felt

according to experience, you have to do a little experiment for you to get the best bass sound, stalwart, gigantic. To get the best bass sound between the subwoofer and the room you, then you should get a 'pass that point. the following manner:

1. Place the subwoofer on your location on our seat. (sub Woofer do not be put on the table / cupboard you high more than 1 / 2 meter)
2. Turn the sub Woofer and you do not forget to disconnect the speaker Amplifier.
3. Play a song you like, which have gained a good frequency bass
4. Then try running memutari room, see the characters that appear bass.
5. You will hear some of the bass sound quality improvements in some corner of the room. This happens due to the interaction between low-frequency space and you. Nah corners you can select as a "node" or the point pas you need to immediately place your subwoofer in a corner of it.

Tag : Power Amplifier