Megabass Circuit

marommuhammad

Tuesday, November 23, 2010

Bagikan :

Tweet

The following is megabass circuit schematic (rangkaian megabass) . The megabass circuit is a modified Baxandall tone control with no bass cut and no treble control. It boosts frequencies from about 30Hz to 160Hz can boost by 14dB.

Skema Rangkaian megabass

Note:

• The input capacitor can be replaced with a .01uf cap if you wish.
• The 10pf capacitor is optional and will start rolling off everything over 15kHz. 5pf will double this to 31kHz.
• The tone control requires a low impedence input. If you already have a low impedence input, the input buffer can be removed. However, the output is inverted.
• The opamp is not critical. A 4558 would be just fine.
• I do not show the parts for the +4.5 reference. Here is the +4.5 voltage divider I used.

IC A4558 Pinning

The A4558 is a monolithic Integrated Circuit designed for dual operational amplifier.

Absolute maximum ratings of A4558 Ap-amp

• Supply voltage VCC 20 or ±10 V
• Differential input voltage VIND 20 V
• Input voltage VIN ±10 V
• Power Dissipation PD 300 mW
• Operating temperature Topr -45 ~ +85 °C
• Storage temperature Tstg -55 ~ +150 °C

Tag : Audio, Tone Control/ Equalizer