Teorema Millman untuk menganalisis Rangkaian DC
Steps to apply theorems milman this is as follows:
1. Change all the source currents are a source of tension with the principle of source transformation. So he sets up as follows below
Milman theorems is that a number of series voltage source is connected with the parallel resistor can be simplified to a voltage source only.
Steps to apply theorems milman this is as follows:
1. Change all the source currents are a source of tension with the principle of source transformation. So he sets up as follows below
2. Determine the total current magnitude Answer algebraic flow from all sources so that there will be a series:
If in the series there are a number of sources of electricity flow parallel with the resistor connected in series, then themillman theorems will be :
Answer:
specify millman first strand, which is connected with the resistor R3
Answer:
specify millman first strand is connected with the resistor R3:
So that the series is to be:
3. Change the source of these flows, to be the source voltage by using the principle of source transformation.
In general theorems Millman formulated
If in the series there are a number of sources of electricity flow parallel with the resistor connected in series, then themillman theorems will be :
- Example 1
Answer:
specify millman first strand, which is connected with the resistor R3
So that the series is to be:
- Example 2.
Answer:
specify millman first strand is connected with the resistor R3:
So that the series is to be:
Thus, large currents I (Flow R3) can be determined with the Ohm law:
Answer:
Millman rope so that it is as follows:
- Example 3
Answer:
Millman rope so that it is as follows:
Tag :
Circuit Calculations
0 Komentar untuk "Teorema Millman-Analisis Rangkaian DC"